Buy or Renew
Buy or Renew
darwin_valdez
Level 1
Level 1
Member since ‎04-05-2010
‎08-18-2017
Recent Badges
Awards

User Statistics

  • 11 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
See all
5 Discussion Posts
10 Discussion Posts

User Activity

how to NAT 192.168.10.0/24 to 192.168.11.0/29 segment

04-27-2011
Hi,How to NAT 192.168.10.0/24 to 192.168.11.0/29 segment for us to be able to use the VPN of 192.168.11.0/29?Regards,Darwin

How to configure vpn using two segment in one tunnel?

02-10-2011
Hi Guys,Please help me how to configure two segment in one vpn tunnel. Our client has two segment which is 10.15 and 192.168. We already established VPN connectivity. We can ping the 10.15 segment, but we cannot ping 192.168. Herewith the configurati...

how to terminate vpn On Subinterface in cisco 2821

06-01-2010
Hi,How to Terminate vpn using subinterface? This is may current config:crypto isakmp policy 1 encr 3des authentication pre-share group 2crypto isakmp key x.x.x.x address 211.11.11.11!crypto ipsec security-association lifetime seconds 14400!crypto ips...

how to route static ip to another static ip

05-25-2010
Hi,We are using 2821 router with sub-interface of 3. Ex. GigabitEthernet0/0.1, GigabitEthernet0/0.2, GigabitEthernet0/0.3 with Public ip configured on it. What we need to do is to access specific website that should go to GigabitEthernet0/0.2 and ano...

site to site ipsec in cisco 2821

04-05-2010
Hi All, We have 2821 router both at our main and remote office. The main and remote office is connected thrue site to site IPSec VPN using pre-shared authentication. Our ftp, database, remote desktop, and web server are located in our main office.1. ...
Community Statistics
Member Since ‎04-05-2010 09:10 PM
Date Last Visited ‎08-18-2017 03:54 AM
Posts 11