About Pinguin3003

Pinguin3003 · 06-11-2021

Hello, i have a IP Phone 7970 which won’t even attempt to pull the Firmware from the TFTP Server after a Hard Reset (3491672850*#).I am using TFTPD32 by Phillipe Jounin as DHCP and TFTP Server.Under the „Log“ tab I can see that it sends a DHCP Reques...

Pinguin3003 · 06-13-2021

So, after Hours of experimenting I took a spare SSD, threw it into an old notebook that I had laying around (Toshiba Satellite A210-1AA), installed a Fresh Copy of Windows XP Home on it, together with the LAN Driver, the Display Driver and Service Pa...

Pinguin3003 · 06-12-2021

You can’t just request a List of the Files available on a TFTP Server, Right? So if it requests the SEPmacaddress.cnf.xml file the Server log would contain something like „connection received on port XXX, File:sepmac.cnf.xml: No such file or director...

Pinguin3003 · 06-12-2021

After monitoring the Traffic with Wireshark it looks like the Phone is sending a DHCPDISCOVER, the Server sends a DHCPOFFER but the Phone does not send a DHCPREQUEST. Is it possible that the Phone denies the DHCPOFFER because a Setting is invalid?I a...

Pinguin3003 · 06-12-2021

1. It is running no Firmware, I performed a Hard Reset (3491672850*#)2. I cannot see the Network settings because the Screen is blank3. I cannot ping the Adress TFTPD32 is showing4. I do not have a SEPmac.cnf.xml. It is not requesting any, I thought ...

Pinguin3003 · 06-12-2021

The Firewall was disabled from the beginning.

Member Since	‎06-11-2021 04:54 PM
Date Last Visited	‎06-16-2021 12:23 AM
Posts	9
Total Helpful Votes Received	5

User Statistics

User Activity

Cisco 7970 won’t pull firmware, DHCP Request every 20 Seconds

Re: Cisco 7970 won’t pull firmware, DHCP Request every 20 Seconds

Re: Cisco 7970 won’t pull firmware, DHCP Request every 20 Seconds

Re: Cisco 7970 won’t pull firmware, DHCP Request every 20 Seconds

Re: Cisco 7970 won’t pull firmware, DHCP Request every 20 Seconds

Re: Cisco 7970 won’t pull firmware, DHCP Request every 20 Seconds