About MIkeDavis1973

MIkeDavis1973 · 10-15-2021

Has anyone experienced issues with a Mitel IP phone behind an RV160 or RV260? The phone boots up (using a PoE adapter between the phone and the router) but won't get an IP address. Other clients such as a laptop obtain an IP address without issue. ...

MIkeDavis1973 · 06-17-2021

I've enabled SNMP over VPN tunnel but it doesn't work. Has anyone else come across this issue? Regards,Mike

MIkeDavis1973 · 11-04-2021

Same issue here too. I was awoken at 2am this morning by my smart plugs flashing (they do this when they can't connect to the internet) and my access point showing a warning light. I rolled back to 1.0.03.22 and traffic flowed as expected.

MIkeDavis1973 · 11-01-2021

That's correct - I only noticed it by accident. I have recently decommissioned a legacy subnet in the core of our network so on the RV260 I've been using for diagnosing this DHCP issue, I did some housekeeping and changed the tunnel configuration to ...

MIkeDavis1973 · 11-01-2021

It looks as though it's a bug in the Cisco firmware. The RV260 is used as a remote VPN end-point with the tunnel configured to route all traffic across the tunnel. Changing this to only route traffic to a specific subnet across the tunnel fixes the ...

MIkeDavis1973 · 10-15-2021

Yep, that's checked and confirmed - a laptop is able to get an IP address from DHCP.

MIkeDavis1973 · 10-15-2021

Thanks M - the phone definitely tries - it works fine behind other routers so I know it's a working phone.

Member Since	‎06-17-2021 08:16 AM
Date Last Visited	‎11-10-2021 12:08 AM
Posts	14

User Statistics

User Activity

RV160 and RV260 with Mitel 5320e IP phone

RV160 SNMP over IPSEC VPN tunnel

Re: New firmware 1.0.03.24 for rv340w

Re: RV160 and RV260 with Mitel 5320e IP phone

Re: RV160 and RV260 with Mitel 5320e IP phone

Re: RV160 and RV260 with Mitel 5320e IP phone

Re: RV160 and RV260 with Mitel 5320e IP phone