We have 2 ISE nodes. We upgraded from 2.4 to 2.7 P9.
After the upgrade i noticed that the (ISE Messaging Service) is not running on Node 2. It keeps flapping between Initializing and not running. I applied patch 9 but that didn't change the situation...
I would like to share my experience with wireless issues of 9120 APs in Fabric mode with 9800 WLC.We had a bad wifi experience and users disconnects & unable to join, etc.After a long tshooting, I couldn't figure out something but i noticed that some...
Hello, i'm building a Python Netmiko code to login to APIC, collect list of nodes, then attach to each node and run some commands that need to be done on the leaf itself (not from Apic via fabric command).
Now, it seems the code can login (attach) ...
I have single WLC with ISE Radius setup and operational normally for wireless users since ling time. However, sometimes i notice this message on ISE (11007 Could not locate Network Device or AAA Client). WLC is added properly in ISE with proper IP & ...
Hello, We have Cisco 2504 WLC with 8.5.182.0 AireOS version. The security scan tool reports that the device certificate of the WLC is signed using weak hashing algorithm (SHA-1). I tried a different software version, but still reported. I believe thi...
If i regenerate the ISE Root CA certificate first as explained here... is it confirmed that it doesn't have any whatsoever impact?https://www.adamhollifield.com/2022/09/fix-cisco-ise-messaging-service.html
Thanks for your response. I also noticed something... when i regenerate the CSR, i don't see the certificate in the Certificate Authority Certificates page. No matter how long i wait, it just doesn't show up. Not sure if this is normal. I tried multi...
Hello. Thanks for the reply. As i stated that i tried to regenerate the CSR for this service but it didn't help. What is the impact of disabling (Use ISE Messaging Service for UDP Syslogs delivery to MnT)? And if this is disabled, should it fix it?Al...
If you read the CSCwb68720 you will know that this is a bug happening from the wireless side (AP/WLC) not from the switch side (DNAC). As i mentioned, upgrading the WLC to 17.3.5b fixed the issue, and i don't see any more MAC flapping logs on the DNA...
