About san4ez39

san4ez39 · 04-26-2023

Hello,I have a problem that started long time ago and no one been able solve that and now it is me who tasked to solve this problem.Phone calls are not forwarded to external numbers like mobile. I have collected the logs from test phone call, but i a...

san4ez39 · 07-29-2022

Hello,I have question regarding this topic. If in one site i will have 9115EWC and 4 AP on 4 different sites (sites to site IPSec) - will EWC see these 4 AP and will they be able to join EWC controller?

san4ez39 · 08-04-2021

Hello,I am wondering if i am able to have VPN Site to Site connection from Firepower 1010 to my home Mikrotik.The configuration that i have in place A, where FW is placed looks like this:ISP to cisco router ISR1101 (without security license (so i can...

san4ez39 · 07-04-2021

Hi,i have this setup. Router -> FTD -> Switch -> PC.Router sample config:interface GigabitEthernet0/0/0description ISP1ip address dhcpip nat outsidemedia-type rj45negotiation autono cdp enable!interface GigabitEthernet0/1/0!interface GigabitEthernet0...

san4ez39 · 06-25-2021

Hi,i have Cisco ISR C1101-4P router.I have configured it to take DHCP address from ISP on WAN port. Configured VLAN1 IP Address that i receive connecting my PC to LAN Ports.Router can ping IP like 8.8.8.8 or any other and can ping FQDN. But my comput...

san4ez39 · 09-30-2023

Hi,no routes, no nat? Hard to tell. Paste config please.

san4ez39 · 04-26-2023

Just to add router configuration regarding voip. phones are configured on router.voice-card 0dsp services dspfarm!!!voice service voipip address trusted listipv4 172.22.131.0 255.255.255.128ipv4 172.22.149.0 255.255.255.0ipv4 172.22.148.0 255.255.255...

san4ez39 · 01-09-2023

Hi,it is hard to recollect now what i had precisely did.. But in SI you have 2 tabs network and URL.There you have blocked and allowed list. So my allow list is networks that done in FTD (internal VLANS etc.), none of my Netrwork object are in black ...

san4ez39 · 07-29-2022

Thank you. I think i will go and suggest instead of 4 AP take 4 EWC. Because i do not know how the end configuration will look like. Maybe an IPSec or DMVPN or some thing else and how networks will interconnect.

san4ez39 · 10-13-2021

Thank you. That did it.i never thought that deny should be first and then permit

Member Since	‎06-25-2021 03:37 AM
Date Last Visited	‎04-24-2024 12:05 AM
Posts	23

User Statistics

User Activity

Phone call are not forwarded to external numbers(mobile)

Cisco C9115 EWC to C9115AP over IPSec

VPN Site to Site/IPSec from FW1010 to Mikrotik

No internet behind FTD

Router ISR 1101-4P configuration. IP address DHCP from ISP. Not routing local network.

Re: Router ISR 1101-4P configuration. IP address DHCP from ISP. Not ro

Re: Phone call are not forwarded to external numbers(mobile)

Re: No internet behind FTD

Re: Cisco C9115 EWC to C9115AP over IPSec

Re: VPN Site to Site/IPSec from FW1010 to Mikrotik