About neilobrien

neilobrien · 02-15-2019

Hi All, Similar to the regex /(6451[2-9]|645[2-9][0-9]|64[6-9][0-9][0-9]|65[0-4][0-9][0-9]|655[0-2][0-9]|6553[0-5])/ for 16bit Private AS 64512-65535, I'm looking for a regex that will cover the 32bit Private AS Range 4200000000 - 4294967294. Unf...

neilobrien · 04-05-2012

Hi Guys,I'm looking for a way to setup a syslog pattern match on everything except a particular string.So for example, I want to monitor the rate at which new logs appears in the local buffer with the exception of messages with %PARSER contained in t...

neilobrien · 09-06-2011

Hi Guys,What I want to configure is this:Call to DN1234 rings out and the CNFA settings are set to ring DN5678. If DN5678 doesn’t answer either, I want it to go to the voicemail of the originally dialled number, in this case DN1234. I thought Call Fo...

Call Manager Recording Profile · 08-26-2011

Hi,We've recently set up call recording using Dual Media Stream. In CUCM, a call recording profile is set up which consists of a SIP trunk to the call recording server. It all works fine.However the problem is that the system was intended to record...

neilobrien · 07-21-2011

Hi,I have 2x 4507's in the core with a L2 either channel between them. I have multiple 2960s stacks, each a seperate vlan/subnet connected back to the core over dual fibre links (one to each core). I have increased the STP cost on one etherchannel ...

neilobrien · 04-05-2012

Thanks mtimm - I did try this (or something similar) however I get the below error when the "?" is used in the regex expression. Note: I am adding the "?" after executing ctrl-v%EEM: Failed to create event for applet SYSLOG:regular expression compi...

neilobrien · 09-06-2011

Thanks Rob,I had "assumed" that the "CF No Coverage" was doing what I wanted, I didn't realise it wasn't working until the user came back to me. My own fault for not testing it first!!THanks again for the quick responseNeil

neilobrien · 09-06-2011

Hey Rob, thanks for the prompt reply.I just realised left out a crucial but of info!! Both phones are set to CFNA to each other. So in my example above, DN5678 as the same settings with CFNA set to DN1234.Is a huntgroup the only option??Thanks,Neil

Call Manager Recording Profile · 08-26-2011

thanks for the reply Joe. If it's a case where it can't be done within CM, I'll probably go the SPAN route.Thanks again,Neil

neilobrien · 07-30-2011

Hi Karl,It's a while ago now but if I think it was to do with the order in which Call Manager was choosing the resources within the MRG when both the software CFB and the hardware CFB were both in the same MRG. From the traces I was seeing that it ...

Member Since	‎01-24-2007 12:41 PM
Date Last Visited	‎02-20-2019 02:06 AM
Posts	168
Total Helpful Votes Received	43

User Statistics

User Activity

Regex for BGP 32Bit Private AS Range

syslog pattern match

Call Forward No Coverage

Call Manager Recording Profile

Strange Issue on multiple 2960s Stacks

syslog pattern match

Call Forward No Coverage

Call Forward No Coverage

Call Manager Recording Profile

Re: Troubleshooting IOS Hardware Conference Bridge