About Takeshi Nakajima

Takeshi Nakajima · 09-14-2012

Dear All, This is Takeshi.Nakajima.I have a problem about Jabber tablet.Jabber tablet can not receive contents from MCU.[Steps to Reproduce]1:I connected Jabber tablet and C20 to MCU4520. It can show the camera image and hear the voice.2:Send the pr...

Takeshi Nakajima · 07-30-2012

HiPlease show the information as following URL,http://www.cisco.com/en/US/partner/ts/fn/635/fn63534.htmlYou will find the information as you want.Thanks and best regards,Takeshi Nakajima.

Takeshi Nakajima · 07-29-2012

Hi All,Thank you for your supporting.I set the command SX20 and ProfileC60 and make a call , i can resolved the issue!"xConfiguration Video Input Source 1 OptimalDefinition Threshold60fps:Never"Finally,i resolved two issue,1)The image send from SX20 ...

Takeshi Nakajima · 07-26-2012

Hi Mubashshir,Thank you for your reply,I change PowerLine Frequency to Auto and 50Hz,60Hz,but it occuers same issue.Do you have any idea?Thanks and best regards,Takeshi Nakajima.

Takeshi Nakajima · 07-26-2012

Hi Teck Chye Tang,Thank you for your reply. Question 1: You have swap another SX20 codec, and issue is the same, right-> Yes,it is correct.Question 2 : Do you mean the 4X S2 camera works normally with a C60? So you mean you connect the HDMI part of...

Takeshi Nakajima · 07-26-2012

Dear Danny,I up 'xstatus Diagnostics //Drop' and 'xstatus Diagnostics //LastIntervalLost' as following,xstatus Diagnostics //Drop*s Diagnostics Call 2 Channels IncomingAudioChannel 14 Netstat 1 Drop: 0*s Diagnostics Call 2 Channels IncomingVideoChann...

Member Since	‎07-23-2012 05:10 PM
Date Last Visited	‎06-27-2018 12:18 AM
Posts	8

User Statistics

User Activity

Jabber tablet can not receive contents from MCU.

QS20 and upgrade to 5.1.3 issue

SX20 Camera Image problem

Re: SX20 Camera Image problem

Re: SX20 Camera Image problem

SX20 Camera Image problem