Hello, I have been trying to configure a Cisco 877 with ADSL and dynamic IP configuration but I get get always the same error with "debug dialer" [Di1 DDR: Cannot place call, no dialer string set.]Please I need some help, It's like a joke, several ye...

Hello,I would like to know if it's possible to enable traffic between two vpn clients using the same IP pool. I have seen that it's possible between a remote LAN-to-LAN VPN and a remote VPN Client. I have found this document : http://cisco.com/en/US/...

Hello,I have migrated from PIX515E with VPN client configured and working fine to a pair of ASA 5520 with active-standby scheme. All is working fine but I have a problem with RDP and file sharing. When I connect to the VPN with the client I can ping ...

Hello,I have a PIX 7.2 and a new cache box ( Bluecoat ), I'd like to configure WCCP in order to redirect all web traffic to the cache box.I have seen that WCCP must be configured at the same interface where the clients and the cache box are located. ...

Hello,I'd like to know your recommendation about this topic. I have to connect two LANs with a point to point wireless link. I have a 1310 wireless bridge, and I have one 1231 AP and one BR350 wireless bridge. What's better solution 1310 and BR350 or...