About holtchristopher

holtchristopher · 10-06-2013

Hi,I have a strange problem afflicting all of my remote access vpn users to a 5510. The clients include the windows cisco client (latest version), VPNC for windows, and the built-in OSx client. All seem to be equally impacted. The tunnels are init...

holtchristopher · 11-27-2012

Hi,I have a pair of ASA5510s in a failover configuration where I see these 2 logs repeated every 15 seconds. 105008 1 Nov 27 2012 10:39:27 (Primary) Testing Interface management105009 1 Nov 27 2012 10:39:28...

holtchristopher · 10-10-2013

I've turned on logging to capture to a syslog server not at level 7. I've also managed to correlate the problem to the logout of another VPN session from (the same or a different) user behind the same NAT device (netgear wifi router/cable modem in t...

holtchristopher · 11-27-2012

The two ASA's are only directly connected by the failover link. (Ethernet0/3 on both devices). The Ethernet0/0 on each device is wired to an unmanaged switch (one per ASA). My two servers are connected to each of those switches with bonded interfac...

holtchristopher · 11-27-2012

So if failover is going to test all the interfaces, why is only the management interface constantly reporting this? What message is the ASA expecting from the failover unit on the management interface when the failover link is on Ethernet0/3?

Member Since	‎11-27-2012 08:39 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	6

User Statistics

User Activity

5510 remote access VPN stops passing traffic (partially)

Unknown 105008 and 105009 logs on non-failover interface

5510 remote access VPN stops passing traffic (partially)

Unknown 105008 and 105009 logs on non-failover interface

Unknown 105008 and 105009 logs on non-failover interface