I'll try to explain the issue I'm having as detailed as possible without providing an output of the configuration as this is on a closed network. I just took over this network and it's a bit of a mess. I included a simplified network diagram of what ...
I took over for a network engineer who left and I'm trying to configure a Cisco 3650 with IOS-XE version 16.12 to work with some Avaya 9608Gs with Application File 7.1.6.0.8. There's a Cisco ISE server that allows it on the network using mab but does...
I'll give it a try tomorrow at work and see... I really was thinking that HSRP is causing this issue, but I really just wanted to understand why. traceroute does not work from the PC - it can't even ping the IP of the switch it's connected to.
the ip default gateway of all the layer 2 switches are configured to the HSRP Virtual IP (172.10.1.1). Are you saying that HSRP doesn't work in this design and I should specifically use one of the SVI IPs (172.10.1.2 or 172.10.1.3) of one of the core...
Show interface trunk - I did this and the VLANS are allowed on trunk, both the switch VLAN and the workstation VLAN. SVI is UP - I'm able to SSH to all the IPs of the SVI on both core switches.
Both L3 devices, Core 1 and Core 2 are doing inter-vlan routing (sorry, i know it's not the right multi layer switch icon). All the other switches have the VLAN configured and all the trunks between the access switches, distribution and core are allo...
Hi Elliot, unfortunately that is not the case as I specified above, the phones have no problem getting an IP address on any other switch on the network - just the one that I cnfigured.
