I wanted to know if anybody has a sample config for a PUB and SUB solution. I am trying to design one for 300 voice mail user along with a UCCX Call center for 25 users. I was looking at the C210-M2 but I needed some advice.
Can you configure a Cisco 3945-CME-SRST to do UCCX? I see that you can use a ISM-SRE-300 module but will it work? I configured the 3945 for 300 VM users and then configured a MCS7816 server with 25 users but I was reading some documents ...
I wanted to know if anybody has a good website they would recommend to purchase CCNP Voice viedo CD's. I am looking at doing my traning on my own as the boot camps are 10K. Any recommendations would be greatful. Thanks Joe
Jamie thank you so much for the sizing tool link. I did find that the B200 series would be a good fit for 250 users. To me it's an over kill as the servers support upto 7,500 users. I do have another question tho? The 3900 series routes support upto...
I was going to call Cisco partner help line but for some reason my last design I got from them was not too accurate. I found that the USC-210 server is what I will go with and a dual processor is what I would design it but my issue is in a PUB and S...
Chris, The way I have it designed as a 3945-CME-SRTS for 300 users along with a MCS 7816 server with 25 STD licenses will work? I was confused as the 3945 has a ISM-SRE-300 module and I didn't know if you can use it to do UCCX on the 3945 with the so...
The solution I am looking to do is Connect a Comcast broadband Cable modem to the RV082 and then connect the e2500 to the RV082. I would connect the RV082 WAN port to the Broadband cable modem WAN port. Then I would connect the RV082 via the LAN por...
