We are planning to install patch 10 on the 2.6 version. We have patch 7 already installed with a couple of hotfixes like Log4j and another bug. My question is, do we need to remove the hotfixes before installing the patch 10 and then again install th...
My question is, what will happen if we delete the user on the AD that was used at the time of AD integration on the ISE. Does the user used at the time of AD integration be part of the AD forever? Thanksshubham
Hello All, We have a couple of ISE deployments in our network.The issue is that we are getting thread exhaustion alerts on our external syslog monitor.ISE 2.6 patch 7 :- We are getting admin thread pool exhaustion alerts from all the PSNs in the clus...
Hello All, Our client has multiple large deployments with 25-40 nodes in each cluster. These are all physical boxes. Some are SNS 3595 and some are the newer 3695. We monitor these servers using syslog and SNMP on splunk and NNMi. Currently we monito...
Hello All, We have a 6 node deployment of Cisco ISE. Port 80 was found to be open on the Mnt node during a pen test by the relevant team. They are asking to shut port 80 down as for security concerns.As for my information, we cannot configure/modify/...
Hello Mohammed, Thanks for the reply. The LDAP was never configured on the ISE and we never intend to in the future.If I navigate to Administration>External Identity Sources> LDAP, there is absolutely nothing. And that is the reason we are a bit amus...
Hi Greg, That is correct, An error is displayed when we use the same IP for different profiles. The scenario we are facing is that the Remote locations have Cisco WLCs that use a default device profile as there were loads of these WLCs so a simple de...
