About Amardeep Singh

Amardeep Singh · 07-13-2021

Hi Guys, I am researching on setting the port segregation on the cisco switch using snmp. Is there any MIB that I can use to achieve this? I want to enable/disable the port security on an interface / port. It tried using the cpsIfPortSecurityStatus ...

Amardeep Singh · 07-14-2021

I also tried using the cpsIfPortSecurityStatus for setting the status on the interface. Example : snmpset -c private TEST cpsIfPortSecurityStatus.0105 integer 1 But it gives the error - 'SNMPv2-SMI::enterprises.9.9.315.1.2.1.1.2.10105': notWritable ...

Amardeep Singh · 07-13-2021

Hi Tyler, Can you please share the sample snmp command that you used to achieve this? I also want to achieve something like this - https://community.cisco.com/t5/network-management/port-segregation-using-snmp/td-p/4432211 Thanks in advance.

Amardeep Singh · 07-13-2021

Hi, The above link shows how to copy over the configs. I want to achieve something different like I need mib/variables to allow me to set a trunk port and add/remove vlans on that interface. interface GigabitEthernet1/0/8switchport trunk allowed vla...

Member Since	‎07-13-2021 04:43 AM
Date Last Visited	‎07-18-2021 11:57 AM
Posts	4

User Statistics

User Activity

Port security enable/disable using snmp

Re: Port segregation using snmp

Re: Change Trunk Port Configuration via SNMP?

Re: Port segregation using snmp