Basic config of SRE-900. I am trying to install a VMSS package on it for testing, but the install fails.What is the trick to install from SOLARWINDS sftp server ON a local PC attached to home ISP router. seems we need to configure TTY 67 to ge...
2921 has 9-port HWIC FE switch module. IP phones send ARP broadcast for TFTOP SERVER, but router is either not forwarding the ARP, or the CUCM PUB TFTP server is not reciving the ARP request, so phones cannot find TFTP SERVER. WIRESHARK SHOWS pho...
2921 with CME 11.0 LOADED. 2921 HAS An ETHER MODULE IN IT WHERE PHONES ARE SETUP AS ACCESS PORTS WITH VOICE VLAN, router has 2 VLANS, 1 FOR DATA, 1 FOR VOICE, has 2 different DHCVCP POOLS, exactly like a config seen on CCO. no DHCP handed out to ph...
I read that solution late last night, and had a chuckle at how simple and elegant the fix was, I was confident it would work.Today i made those few changes, and the phones loaded the ITL, GOT TFTP CONFIG, AND phone default sip-load, and registered wi...
Your setup is like mine, except you have a dot1Q trunk to the L2 3560 running the DHCP, as a router on a stick, whereas I am using a 2921 with a etherswitch POE module builtin, no external 3560 switch, so that is where I am getting hosed up, since ...
the client pc, the 2921 LAN router can reach all the hosts on 192.168.15.0 / 24 , the CUCM on .31I have changed the dhcp scope to 192.168.15.0 ( the same subnet as the ESXI hypervisor where the CUCM hosts live.I changed the data and voice VLAN TO B...
no, it says no ITL FILE INSTALLED. NO ITL files there, all empty.. its ready and waiting for its new config file, but cant talk to TFTP TO get it.i reset ALL settings already..but it still has old SIP code in it. the question really is, why is there ...
