About BmfL

BmfL · 11-23-2021

Hello, I have updated FMC and FTD to version 7.0.1 (build 84) and since then I have noticed that when creating a tunnel VTI the tunnel source does not provide all available interfaces. For example, in one of the cases I want to select outside interfa...

BmfL · 11-19-2021

Hello, I am currently unable to add FTD into FMC, each attempt it comes out with error message host x.x.x.x is not reachable. - FMC in Europe, FTD in China.- The FMC ping successfully FTD and vice versa.- I did configure network management-data-inte...

BmfL · 10-15-2020

Hi Folks, I was researching and I could not find documentation referring to PBR on ASA or FTD but in specific case: Using PBR where the LAN users will be forward to ISP2 if trying to reach a particular site, for example google. And considering that ...

BmfL · 10-13-2020

Hi Folks,Any specific date for 6.7 release? Really wondering if VTIs will be included

BmfL · 08-30-2016

Hello, I have cisco ASA device with versions 9.1(5)21 and 9.1(6)11. When analizing at Cisco Security Advisory the information is not 100% clear. http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20160817-asa-snmp First ...

BmfL · 10-28-2022

You need to review the configuration on both ends to find some misconfiguration. After reviewing, if you did not see any problem please use aditional comands for deeper visibility.Use the command show asp drop to verify if there are drops happening.U...

BmfL · 10-28-2022

Despite you already answer some of this questions it does not hurt to recheck it:Double check that you have TCP port 8305 open between the two devices / appliancesIn addition, you might want to check if the the FTD is behind a NAT device (in such a c...

BmfL · 10-28-2022

Make sure you do not see telnet x.y.z inside on your configuration. I don't want anyone to configure telnet on ASA then review the users configured and associated previleges.

BmfL · 12-07-2021

7.1 on FTD has issues as well, like you cant create VTIs properly, unless you have 7.1 on FMC but still 7.0.x on FTD.I would wait couple more weeks and upgrade to a stable release.

BmfL · 12-07-2021

@ulises.suarez.verde : https://www.cisco.com/c/en/us/td/docs/security/firepower/710/fdm/fptd-fdm-config-guide-710/fptd-fdm-s2svpn.html

Member Since	‎08-30-2016 02:01 AM
Date Last Visited	‎02-14-2024 12:05 AM
Posts	32
Total Helpful Votes Received	15

User Statistics

User Activity

Issue selecting Tunnel Source

Unable to add FTD into FMC

PBR on ASA / FTD

FMC 6.7

NEED CLARIFICATION ON Cisco Adaptive Security Appliance SNMP Remote Code Execution Vulnerability

Re: Issue with a site to site vpn tunnel

Re: cannot register FTD to FMC

Re: Disabling telnet on ASA5505

Re: Firepower 7.1 Released

Re: Firepower 2130 support site to site vpn to google cloud with bgp r