About Antony_85

Antony_85 · 03-22-2023

Hi All,I downloaded the asdm-openjre-7191-90.bin (Cisco Adaptive Security Device Manager for ASA 9.8-9.19 integrated with OpenJRE) BIN file and I have no clue how to execute this.I did some googling and from what I found you need to burn it to a CD a...

Antony_85 · 10-25-2021

Hay guy, I am in bit of a limbo here. I am fairly new to this organization. I am tasked with various network audits and one of them is to map what’s connected to what? I have about 20 odd cisco 2960/2950 series switches where I have terminal access t...

Antony_85 · 08-05-2021

Hay guys,Hope everyone is doing well.I am trying out the following scenario in a lab environment but having trouble configuring. VLAN 10 (Native) 172.16.10.0/24DHCP server, Distribution switch and other 3 switched should be in this vlan (for manageme...

Antony_85 · 08-01-2021

Hi guys, I was wondering if I could get some assistance from one of the gurus here. I have switch config knowledge but not much ASA config experience. The scenario is as follows (diagram attached)Plant Switch: I don't have access to it. It's managed ...

Antony_85 · 07-19-2021

Hi Everyone,I have a SG350-28P switch acting all haywire. The switch has 1 wireless link and 6 IP Cameras (PoE) connected to it. The ports where the IP cameras are connected; are dropping randomly (frequently). Port1 (where the wireless link is conn...

Antony_85 · 08-09-2021

Hi everyone,So after 2 weeks or so the switch started to do act up. I had another SG350 8 port switch and I installed it there and disable STP. everything was good until I plug in the IP cameras. as soon as I plug in the cameras the new switch starts...

Antony_85 · 08-09-2021

Hi Again Balaji,1. DHCP server works in vlan 1. I couldn't find a place to change the DHCP helper in the packet tracer. 2. I didn't configure VLAN 10 as NATIVE in ADMIN, CTM, and SERVICE Switches. I will try this and update you. Thank you for the res...

Antony_85 · 08-04-2021

Hay guys,So it worked. Attached below is my config. Thanks, heaps for all the advice and help. The only issue was I couldn't assign 10.29.96.X to the management interface of the ASA. So had to assign a different subnet but enable ASDM access to INSID...

Antony_85 · 08-04-2021

Thanks, mate, The network team informed me they configured an Access port so I should be able to test the outcome today. I'll keep you guys posted

Antony_85 · 08-03-2021

Hi Balaji,Thank you for your response. This example is exactly the setup I need. I realize (Rob pointed out) that I made a mistake in my diagram. all 3 devices will be in the same subnet (just like in the example). I managed to get the INSIDE interfa...

Member Since	‎07-19-2021 07:21 PM
Date Last Visited	‎03-24-2023 12:03 AM
Posts	17
Total Helpful Votes Received	10

User Statistics

User Activity

ASDM, 7.19 setup

Network Discovery

Practice LAB - help wanted

ASA config help

SG350-28P Some ports dropping on/off

Re: SG350-28P Some ports dropping on/off

Re: Practice LAB - help wanted

Re: ASA config help

Re: ASA config help

Re: ASA config help