About jcattaneo

jcattaneo · 07-12-2011

Hello,I am definitely not a fan of ios 8.3, and specialy the change about "nat".I trying to use this example : http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807f9a89.shtmlfor creating RA VPN with access to an S2S VP...

jcattaneo · 06-28-2011

Hi, I would like to know, if it's possible to have this configuration with an ASA5510 :(1)- Remote access VPN (access by the outside interface)(2)- Site to site VPN (same access interface)The objective : the vpn users (1) can access to the distant se...

jcattaneo · 07-18-2011

Thanks for your reply !I am also not a fan of "any", then i will separate the nat rule.about the NAT from 2 network class C to 1 class C, i understand my mistake. Then, if i reduce the network,with something like that :object network obj-172.16.1.0 ...

jcattaneo · 07-15-2011

Thanks a lot...A last question.If the network 20.20.20.0 is a remote VPN access, and we use the following command : same-security-traffic permit intra-interfaceWe must change somethings?Best... I do this test :object network obj-172.16.1.0 subnet...

jcattaneo · 07-13-2011

Hello,the access-list entries look like this :access-list inside_nat0_outbound extended permit ip 172.16.1.0 255.255.255.0 10.10.10.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip 172.16.1.0 255.255.255.0 20.20.20.0 255.255.255...

jcattaneo · 06-29-2011

Great, tks a lot !

Member Since	‎06-28-2011 06:52 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	6

User Statistics

User Activity

Configure AR VPN to S2S VPN with 8.3

Remote VPN to site-to-site vpn on ASA ?

Configure AR VPN to S2S VPN with 8.3

Re: Configure AR VPN to S2S VPN with 8.3

Re: Configure AR VPN to S2S VPN with 8.3

Remote VPN to site-to-site vpn on ASA ?