About james.mathieson

james.mathieson · 08-02-2023

Hi all,I've got a Cisco 9800-40 WLC with software 17.6.5I've also got a WLC 5520 with software 8.10.151If I try to move a 9210 from the 9800 to the 5520 the AP doesn't move, even after I change the controller on the HA tab and reload the AP.Although ...

james.mathieson · 06-10-2023

Hi all,Having just upgraded my ASA to version 9.18, I'm now no longer able to ping the inside interface through the VPN.From the ASA I can no longer ping inside (then my internal network)On version 9.16 this was fine.The management inteface is still ...

james.mathieson · 03-15-2023

Hi all,I have a WLC5520 with a few hundred APs on.I want to change the high availability tab details for about 200 of them.For the life of me I cannot find a way to do this in one hit.Is there a way to select multiple APs to do this?Many thanks.James

james.mathieson · 01-19-2023

Evening all!Something is bugging me because I cannot find a solution to my problem.I have a switch template that I put together which includes SNMP v3 config.The issue I've got is that I want to have in the template, the encrypted SNMP v3 credentials...

james.mathieson · 09-15-2017

Hi All,Scenario:-I have set-up VSS on two 6800s and it works just fine.I've read the design guide and best practices etc and added a couple of lines on switch 2 to delay the ports from coming up for 300 seconds.This is all fine and well but consideri...

james.mathieson · 08-02-2023

Here you go...Console logging : Level - notification, Status - enabledSyslog logging : Level - warning, Status - active, IP - 10.151.x.xSystem logging :Aug 2 12:02:06 kernel: [*08/02/2023 12:02:06.7860] capwapd: reading file /click/nss_lag_control/ca...

james.mathieson · 08-02-2023

Hey Leo,Here you go...FCW2541YYELJames

james.mathieson · 08-02-2023

When I say, manually change the image, I mean SSH to the AP, and change the boot path - then it works fine.This is unusual and this isn't the first time I've moved APs but they seem to get stuck moving across on their own.I can wait for ages and noth...

james.mathieson · 06-10-2023

Thanks MHM but I did mention that it is already set in my post above.This is something that has changed in this ASA version.

james.mathieson · 06-07-2023

Thanks for the info.After more digging it seems it's been fixed, or more of a proper workaround in 9.18.In 9.18 you can have loopbacks and they're compatible with SNMP etc, so that's what I'm going to do.Cisco do make some bad decisions these days. ...

Member Since	‎10-09-2004 08:10 AM
Date Last Visited	‎08-26-2023 01:58 AM
Posts	39
Total Helpful Votes Received	3

User Statistics

User Activity

Cisco 9120 AP not swapping image on change of controller

ASA 9.18 ICMP to inside interface through VPN

Change multiple APs High Availabilty tab on WLC 5520

Cisco SNMP v3 Credentials

Modifying VSS config on one switch

Re: Cisco 9120 AP not swapping image on change of controller

Re: Cisco 9120 AP not swapping image on change of controller

Re: Cisco 9120 AP not swapping image on change of controller

Re: ASA 9.18 ICMP to inside interface through VPN

Re: Cisco ASA- Configuring snmp over the IPSEC tunnel