Hi.I have weird issues with my m9100 MDS's cpu. After CISCOWorks complains that thoses equipement were peaking at 100% every minutes or so, I went on the equipements and try'd a few "show system ressources". Here is the result (remark the cpu states ...
Bonjour.I am actually having an issue with manually assigned IP addresses by a DHCP server on a Cisco 2621XM (12.3.25).We are actually using a central UNIX DHCP server without any problem since a few years but, for IP Telephony (a Nortel IP phone lon...
Hi.I have some trouble releasing the mac-address learned sticky on an interface.I am working on a 3560 series switch with 12.2-25 SEE1 IOS image.Here is an example of my port configuration. interface FastEthernet0/1 description IPWIN2S01 switchport a...
I am searching a way (if it's possible of course) to deactivate the possibility to hold down the "mode button". After 10 sec., the switch reboot and, the config is ignored (renamed).Thank you
Thanks for the answer mchin345.Unfortunately, I've already tried those options but, don't seem to work correctly with the OS 12.2.25 SEE1 as I said below. The commands options are available but, the clearing doesn't work.Upgrading to 12.2.40 allowed ...
Thank you for your fast answer.Obviously, I don't want to disable the password recovery but, only the "hold mode button for 10 seconds" feature. I work in a large compagny with many branches. With this option, if someone hold the button on a switch i...