About skbluecollars

skbluecollars · 07-31-2021

Hi, I have a destination IP and a VRF Name using this am able to collect the primary path of a destination IP. Now i have to collect all the alternate paths towards the destination IP. Whether we have to collect all the routing table from all device...

skbluecollars · 08-01-2021

Hi ngkin2010, You have understood my requirement. I have attached a sample connectivity which i have manually traced up to a level based on physical connections and routes on each device. I want to automate this process. Ex:- If a router goes down or...

skbluecollars · 08-01-2021

Hi Paul, Thanks for the reply, Given commands provides very minimal no of route paths, Also it branches the route paths whenever i go to next hops.

skbluecollars · 08-01-2021

Hi Balaji, In Telecom network, Radio tower will be connected to a router in the mesh network. I have to find what are all the alternate paths available and cost of each paths and capacity of the alternate paths to be identified. So for the telecom ne...

skbluecollars · 07-31-2021

Yes, I do have the network topology and based on links for single destination more than 10 Paths i can find manually using show route vrf command. Whether this a normal way to run thee commands and collect data. I am trying to automate this process u...

Member Since	‎07-31-2021 11:37 AM
Date Last Visited	‎08-09-2021 12:27 AM
Posts	5

User Statistics

User Activity

How to find Alternate Paths in a routing table

Re: How to find Alternate Paths in a routing table

Re: How to find Alternate Paths in a routing table

Re: How to find Alternate Paths in a routing table

Re: How to find Alternate Paths in a routing table