About AminRamadan

AminRamadan · 04-18-2024

Hello,I would like to update our server usc m4 from GUI and not from ISO boot media. I found that i can do that by following:However, I cannot find the .bin for Bios or BMC in (ucs-c220m4-huu-4.1.2m.iso). How do i download them ?

AminRamadan · 04-13-2024

Hi,I'm in the process of configuring DMVPN and need some clarification on the correct syntax for the ip nhrp map command. Specifically, I'm unsure about the order of IP addresses in the command. Could someone explain the difference between these two ...

AminRamadan · 03-21-2024

Hello,SSH service is activated on vpn 0 under interface ge0/0. The SSH stopped working after I activated the NAT on the same interface!. Does anyone know why? thank you

AminRamadan · 03-12-2024

Certainly:"What kind of configuration should the hub have to communicate with the FW in SD-WAN Service Chaining?I read somewhere that the network service must be layer 2 adjacent to the WAN edge device. What does that mean?

AminRamadan · 10-25-2023

I have an FTD managed by FMC. The FTD has a remote access VPN configuration. The problem is that any IP can communicate with the outside interface over DTLS/TLS port 443.How can I filter which IPs are allowed to use DTLS/TLS with the outside interfac...

AminRamadan · 04-18-2024

You mean to download (ucs-c220m4-huu-4.1.2m.iso) and use it ?

AminRamadan · 04-17-2024

I know this is old thread but we have to as following:vrf destination vrf_nameaddress-family ipv4exit!interface tunnel 0vrf forwarding NAME tunnel vrf NAMEip add Xx.x.xtunnel source x.x.x.xtunnel destination x.x.x.xexit

AminRamadan · 03-25-2024

How can i get to CCO and flash the bios? There is no way on CIMC to do that.

AminRamadan · 03-22-2024

Yes, I tried to connect via SSH to other transport inteface and it worked. Moreover, the ssh works fins when i de-activated the NAT on int ge0/0. So the problem in NAT.

AminRamadan · 03-13-2024

thank you for answering

Member Since	‎08-03-2021 01:01 PM
Date Last Visited	‎04-19-2024 12:05 AM
Posts	26
Total Helpful Votes Received	7

User Statistics

User Activity

how to update UCS m4 Bios and BMC from GUI

DMVPN (ip nhrp map spoke_tunnel_ip or spoke_public_ip)

SSH not working after activating NAT

SD-WAN Service-Chaining & vEdge configuration

How I filter in FMC which IPs are allowed to speak with intf outside

Re: C220M - SNS-3595-K9 invalid signature detected

Re: GRE tunnel protocol status goes down with vrf membership

Re: C220M - SNS-3595-K9 invalid signature detected

Re: SSH not working after activating NAT

Re: SD-WAN Service-Chaining & vEdge configuration