About JonathanC1

JonathanC1 · 10-11-2023

Hi Folks,I need to configure an SSID which will be anchored to a foreign controller. The foreign controller is NOT on DNA Center. The C9800 is managed by DNAC however it seems the configuration to do this all on DNAC is post the software I am on and ...

JonathanC1 · 08-21-2023

Hi Folks,Just wondering if this is possible. I look at DNAC and in the fabric site SSIDs i have to assign an IP pool. If I wanted an SSID VLAN to be deterministic of a dynamic VLAN from ISE is this not possible?ThanksJ

JonathanC1 · 06-09-2023

Hi Everyone,We are looking at replacing our old APs and WLC in one of our hospitals which is 24/7. We will are building an SD-Access environment in parallel whereby we will stand up new 9100 series APs and 9800 WLC.There are many APs! I was wondering...

JonathanC1 · 04-27-2023

Hi folks,I’ve got a specific use case whereby we need to use peap-mschapv2 and add a condition where by the device has to be in a endpoint identity group by mac. For example the workflow - User connects to wireless with an ssid that is 802.1x enabled...

JonathanC1 · 04-06-2023

Hi do we still get an evaluation in AWS ISE of 90 day regardless of the instance type to migrate. thank you JC

JonathanC1 · 10-16-2023

It is OTT for this SSID the others are fabric. When you say configure manually do you mean a template in DNAC? Thx

JonathanC1 · 09-01-2023

I'm pretty certain this would work and you could do it through NDFC but lots of caveats to keep in mind like suboptimal routing. I would personally lab it on vCenter with Nexus dashboard & N9Kvs if it was for a customer before getting too far in.

JonathanC1 · 06-09-2023

Open to testing for a prolonger period around a month at least we think. So you tested a number of APs in an area of the building for several months - would that mean roaming breaks between them and legacy controller APs with the same SSID?Thank youJ...

JonathanC1 · 04-27-2023

So can’t do both with the condition? E.g if user is in a certain group in ad. Thx

JonathanC1 · 02-16-2023

I know this is an old thread but curious if you have to use BGWs in a back to back design. Could you theoritically use your spines as the BGW? Similar to ACI Mpod B2B (https://www.cisco.com/c/en/us/td/docs/dcn/aci/apic/kb/cisco-multipod-b2b.html) Ch...

Member Since	‎08-05-2021 01:37 AM
Date Last Visited	‎11-03-2023 01:06 AM
Posts	34
Total Helpful Votes Received	10

User Statistics

User Activity

C9800 and DNA Decisions!

SDA Fabric Wireless & dynamic vlan authorisation!

Migration Best Practises in a 24/7 environment AP + WLC replacement

802.1x and Mab same policy

Cisco AWS ISE evaluation

Re: C9800 and DNA Decisions!

Re: Back to back BGW connectivity for DCI with VXLAN EVPN Multi-Site.

Re: Migration Best Practises in a 24/7 environment AP + WLC replacemen

Re: 802.1x and Mab same policy

Re: Back to back BGW connectivity for DCI with VXLAN EVPN Multi-Site.