Cisco 7609 ISO 15.1(2)S2Extract from show run:ethernet cfm ieeeethernet evc 10041005interface gi1/9service instance 1005 ethernet 10041005encapsulation dot1q 779 second-dot1q 1005rewrite ingress tag pop 2 symmetricxconnect <peer-ip> <vc-id> encap mpl...

Customer site connected to a PE using 2 x E1 circuits aggregated using Multilink PPP. The CE is a 1760, and the PE is a 7206. This is the customer HQ site.Connected to the same PE are three other sites from the same customer. Each is connected wit...

Does anyone know why the value for isis priority on an interface is limited to between 0 and 127. I ask because I am having a problem forming a L2 adjacency with a Marconi SDH Mux. A "show clns is-nei" shows a State of Init, Type of L2 and Priority...

Is there a way of using the access-class command on a MPLS VPN PE router such that incoming telnet connections are rejected on all interfaces that are in a particular vrf.