Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
There has been no network change but about 4 weeks ago I started getting reports that one web page wouldn’t load on WiFi. Now almost no pages are loading on WiFi connections only, and on all 3 SSID’s. LAN traffic is not affected by this, when running...
I randomly keep getting the following on my Firepower console "Deny IP due to Land Attack from <outside port IP> to <outside port IP>I have read a few threads about this and using the information I have not found the source or cause. This just starte...
Having a strange issue when I try and add a client image I receive the following error."Error during file upload. Please ensure that the Firewall Management Center has enough space, the file is valid and that the file name contains only letters, digi...
I'm trying to get core dump files for a TAC case. I am in expert mode the TAC said it should be in var/common directory. So I navigated to cd /ngfw/var/common then command ls -l. But I do not see any core dump files just the following.-rw-r--r-- 1 r...
I have to change ports on or VPN connection due to standard 443 being used by a web server. But after changing the port I get an error "User not authorized for AnyConnect Client access contact your administrator".I get the log in screen put in creden...
I am planning an update tonight for software. I have a TAC ticket open since last week they have un-fortunately been able to see anything misconfigured or causing an issue at this point also.
What is the actual model of the 9800 WLC you are using? Cisco Catalyst 9800-CL Wireless Controller 17.6.4How many APs? 23How many clients? average of 50 - 60 a day The MSS Enable was already set also
The site will not let you upload PCAP, you have to change the file extension back to PCAP, but wire-shark should still open it.Yes if you Nslookup it will resolve.
Ran iperf used a wired connected PC on different vlan as server WiFi pc as clientConnecting to host 192.168.120.14, port 5201[ 5] local 192.168.215.29 port 53070 connected to 192.168.120.14 port 5201[ ID] Interval Transfer Bitrate[ 5] 0.00-1.01 sec 2...
