I know that the Nexus 5600 can use match ip address to filter routes that are imported/exported from/to a VRF. Nexus 7000 can also match and set route target extended community attributes to enhance this import/export map filtering capability but doe...
On a single router, I wish to import a summary route into another VRF and block all of the more specific routes.
I use the using the aggregate-address command which, as usual, generates a route with Null0 as next hop.
The other VRF then imports this ...
Dear Community,
With IOS the banner login & banner exec commands were useful to provide operations staff with heads-up warning of issues and things to look out for on the switch in question. With NX-OS there seems to be only an MOTD banner which is n...
Most guidance I read says that an EPG in a user tenant must use a context (ie VRF) in the tenant where the L3Out is locatedHowever I read in Cisco documentation (link below) that says:
"EPG A and EPG B are in different tenants. EPG A and EPG B could ...
I get the same problem where I get Fault F1700 and the NTP status shows my NTP server is stratum 1 with very low delay but a very high offset.The other common factor between us is that we both have the NTP servers showing in "Polled in client mode" i...
I have seen the message %BGP-3-NOTIFICATION: sent to neighbor (invalid or corrupt AS path) when an eBGP neighbor is configured to AS-Prepend using an AS number that is different from it's own. However the issue I describe is not an exact match for th...
I have seen the message %BGP-3-NOTIFICATION: sent to neighbor (invalid or corrupt AS path) when an eBGP neighbor is configured to AS-Prepend using an AS number that is different from it's own.
Hi,I have four 5596 running 5.2(1)N1(1b). All of them are failing to show debug output.In this example I am trying to redirect debug output to a logfile called "debugs"nexus# debug logfile debugsnexus# debug ip icmpICMP packet debugging is onnexus# s...
