About CaliHC

CaliHC · 08-26-2021

Hello, i have several PHD1080P12X Cams here and a C40 codec.all cams but one is found by the codec if i directly connect the cam to the codec. the one that is not found by the codec can be controlled via serial by a visca serial controller. another p...

CaliHC · 08-30-2021

please nobody any idea? i really would like to flash the firmware on that cam.but i cant via the codec because the cam is not found. I could flash it directly over serial and ethernet but i need the rover.pkg for that.

CaliHC · 08-26-2021

i have build my little own controllers with esp8266i control them over wifi with vmix 4k and visca over ipthe controllers convert the visca over ip to serial and send all needed commands after powering up.and it doubles as a tally light for vmix you ...

CaliHC · 08-26-2021

you have to disable IR control of the camera.with ir control enabled the pan/tilt speed is fast and gets faster when you longer move in one direction. with ir control disabled the pan/tilt speed is constant and can be controlled. but you have to send...

Member Since	‎08-26-2021 03:00 AM
Date Last Visited	‎09-01-2021 12:05 AM
Posts	4
Total Helpful Votes Received	10

User Statistics

User Activity

PHD1080p12x not found by codec

Re: PHD1080p12x not found by codec

Re: VISCA control of a Cisco PrecisionHD 1080p12x

Re: VISCA control of a Cisco PrecisionHD 1080p12x