we are trying to establish a STM1 link between New York and London. the port adapter we use is the pa-a3-oc3smi. we see the interface and protocol UP. but we are unable to ping the wan interfaces from both sides.the configuration is as follows: lon...
A new customer has been added to our network. It is demanded to have snmp access to his link to see the status of link and traffic for management. Can we give ReadOnly access to a specific link with snmp-server community?RegardsK. Sadagopan
Peculiar problem. Experiencing while load-balancing with BGP, finding the traffic not load balancing with the Next Hop as IP configured. Whereas smooth functioning with Next Hop as Interface configured. What could be the reason. RegardsK. Sadagopan
I remember having seen a Cisco Press book titled "Voice Over IP, Frame Relay, ATM for 9e0-423". You can match the Topics covered in the both exam. RegardsK. Sadagopan
the scenario is different. the output of the *show interface* is printed below. the output is on a simplex circuit which is basically a input interface. please advice. regardsk. sadagopanHssi1/0 is up, line protocol is up Hardware is M2T-HSSI-B D...
