Hi Niclas,depends on the platform/IOS, but normally you should be able to get the mac address table using object dot1dTpFdbEntry, OID 1.3.6.1.2.1.17.4.3.1 from the BRIDGE-MIB group.from the MIB locator page:dot1dTpFdbEntry"Information about a specif...
Hi Richard,I mean that the connection will be using the class-default sfarm unless a match is found on the fisrt 4096 bytes of the header. Without "length exceed continue" the connection is dropped unless a match is found in the first 4096 bytes.hope...
Hi Bill,using WAAS express between 2 routers can be done without using a CM. Central Manager is recommended for monitoring and config, however it's not mandatory.hope this helps,Fabrizio
Hi,for question 1, the ACE still stops parsing after the first 4096 bytes. The difference when "length-exceed continue" is used" is that the connection is not dropped but rather load balanced to a less specific match, like class-default if configured...
Hi,you can upgrade 4.3.5 to 4.4.1 directly. I checked internally and this is a questions another customer had. 4.3.5 release date was close to 4.4.1 release date, so I believe this is why it's not present into 4.4.1 upgrade notes.cheers,Fabrizio