About Nana Banahene

Nana Banahene · 05-07-2019

We had several radius servers over the years and currently we have two left with radius server index of 5 and 8. We did cleanup work and removed both but added them back as radius server index 1 and 2 and authentication broke after mapping it back to...

Nana Banahene · 04-28-2019

The rule of thumb is or was the wlan being anchored must be identical on both foreign and anchor, correct? Third party AAA(forescout) is wanting layer 2 security mac filtering on foreign and layer 3 security on anchor(that would mean wlans are not id...

Nana Banahene · 04-02-2017

On a 2504 running 8.3.102 if one wants to create a wlan with wlan ID starting at 17(to bypass default AP-Group), how does one accomplish that? Once that is created, I can map it to AP Group but can't create it in the first place cuz i am limited to ...

Nana Banahene · 01-11-2016

We swapped out 3502s for Meraki MR32 and aeroscout tags for temperature monitoring stopped working. Meraki TAC did not have much of an insight. Hopefully someone on here has had that experience and can offer some suggestions. We have backed out and r...

Nana Banahene · 02-02-2014

I can't seem to get any feedback on small cells from forums...If one inserts the cisco 5310 into a 3600 what other equipments are needed to roam seemlessly between 3G and wifi, such as switches and routers that have protocols in their IOS for gsm an...

Nana Banahene · 06-01-2019

What if you can't see clients on the maps in DNA Center even though CMX 10.5 is added?

Nana Banahene · 05-07-2019

Yes we enabled CoA, and that is how it was prior. If we disable it, we cannot get external forescout to do CoA. What do you suggest?

Nana Banahene · 04-30-2019

Yes, on the anchor I have pre-auth acl on L3. I was just concerned that on foreign I have L2 mac filtering, making the configs on foreign different from anchor, but if I understand you correctly, for wlan in question I can do L2 mac filtering on fore...

Nana Banahene · 04-29-2019

There is a pre-auth acl I configured that needs to be applied and that canbe applied under layer 3 or wlan interface(but wlan interface will not behelpful for pre-auth) hence I need to apply it under layer 3. What are myoptions to get this pre-auth a...

Nana Banahene · 04-02-2017

With a large rock huh, Lmao. Let me clarify...I want to create 10 wlans starting with wlan ID 17. I dont want to use 1 through 16 cuz APs will fall into the default group. Can one create a wlan starting with 17?

Member Since	‎09-18-2011 05:32 PM
Date Last Visited	‎06-13-2019 04:10 PM
Posts	32

User Statistics

User Activity

Radius Server index rearrangement

Forescout Mac Filtering Security and Web Policy

wlan id

RFID tags for monitoring temperature

Small Cells

Re: Adding CMX 10.4.1 to the Prime Infrastructure 3.4 to see client location

Re: Radius Server index rearrangement

Re: Forescout Mac Filtering Security and Web Policy

Re: Forescout Mac Filtering Security and Web Policy

With a large rock huh, Lmao.