Im looking for an upto date Cisco Icon library, that contains not only the older PPT icons but also the newer HW such as SD-WAN cEdge, ACI APIC, vEdge etc. Although the icon-library-production-oct2016 library contains a very good quality image of AC...
Does anyone know if it is possible to force the NAC agent to load up first on boot-up in a windows 7 OS ? I'm aware that delay's can be implemented but the client does not want to use login scripts.
Does anyone know a link or where I can get information about the following:-My customer requires the hostport on an access switch to be allocated to a specific Vlan based upon the AD Group that the user is a memeber of ? I am planning to setup NAC i...
Hi - I am trying to create a port-channel that contains 2 fex interfaces to provide SLB to a UNiX server, each time I try to add more that 1 interface into the Channel-group I get the following message:-"port channel cannot have more than 1 members"....
Hi - I am trying to create a port-channel that contains 2 fex interfaces to provide SLB to a UNiX server, each time I try to add more that 1 interface into the Channel-group I get the following message:-"port channel cannot have more than 1 members"....
BB, thanks for the prompt reply, these seem like physical product stencils rather than logical icons! Do you know if the same exists for the logical icons ?
Guys - I also see this and I am being queried buy the customer. Basically I have the scenario that you mentioned using virtual gateway and vlan mapping but I am seeing dual mac-address entries within the switch mac-address table even after the SSO a...
Thanks for the response - i've already configured up the feature lacp command and several other alternative ways, each time I get the same message - I've also upgraded to 5010 to the latest image and done the install all to also push the upgrade to t...
I'm not concerned about the vPC connections, I already have my vPC's configured from the 2148T FEX to the 5010's.. I'm talking about setting up an etherchannel connection to a server, which when configuring up the GEC the Nexus says "no more that 1 ...
