About asmund.bjerkeborve

asmund.bjerkeborve · 09-22-2021

Good day Gents, I recently encountered an issue when attempting to add new VOIP phone on the 16.08.01 firmware(4331). It should be simple enough change translating a 4 chipher assigned number to the full number on our servers, however receiving the f...

asmund.bjerkeborve · 11-09-2021

No worries. The symbols ^ and $ should signify the start of the string and the end followed by a NULL, respectively, if understood correctly. Do you know why these are invalid syntax eventhough its working on similar routers and even in the running c...

asmund.bjerkeborve · 11-05-2021

Hello Roger, Thank you for your input. Decided to drop the 'start with and end with' operands as a workaround. Do you however have any ideas as to why the operands aren't accepted as valid syntax?Working with several systems and as mentioned initiall...

asmund.bjerkeborve · 09-24-2021

Hello,I am afraid I can't disclose the full number translation. It is basically 'translate this 4 digit IP phone assigned number(the last 4 digits of the full length number) to its full length E164 number.' E.g. 8803.Åsmund

asmund.bjerkeborve · 09-23-2021

Hmm... It appears to be in order. Both images are isr4300-universalk9.16.08.01.SPA.bin for the compared router and the one having this issue. Here is the output of the license details, which also are identical on both, if to any help:RO1#show license...

asmund.bjerkeborve · 09-23-2021

Thanks for the reply. Input commands are added to the topic and are all starting with 'voice translation-rule'. Tests have been made on an identical setup(firmware, router version and general voice config) however the issue is only present on this on...

Member Since	‎09-22-2021 11:47 PM
Date Last Visited	‎11-11-2021 01:17 AM
Posts	6
Total Helpful Votes Received	5

User Statistics

User Activity

Syntax error when editing/readding voice translation-rules

Re: Syntax error when editing/readding voice translation-rules

Re: Syntax error when editing/readding voice translation-rules

Re: Syntax error when editing/readding voice translation-rules

Re: Syntax error when editing/readding voice translation-rules

Re: Syntax error when editing/readding voice translation-rules