Hi guys,
I hope you're well.
Hoping someone can help me or at least point me in the right direction to some useful articles that I can read to understand. Doing some studying on Cisco SD-WAN ZTP and from my understanding once the router is netw...
Hi Svemulap,
Say for example I'm in a scenario whereby I am sending a router to a remote location but do not want an onsite engineer to conduct any configuration on the device, essentially it won't be true "zero-touch" as at some point I will need...
Hi Svemulap,
Would I not need to configure PPP first in order for the ZTP process to begin, as if this is an edge device this would be required in order to authenticate with the ISP, obtain an public IP addresses and provide internet access which ...
Understood, I can understand from the perspective that the device we're installing is not an edge device and is connecting to another device that is terminating out ISP circuit. In this case, our device would receive a DHCP addresses and there would ...
Hi Flavio.
Thanks for that info!
Understood, so prior to the ZTP process I would need to have my device setup for PPPoE so that when the device is connect to the ISP circuit it is authenticated and handed an IP address whereby the device will t...
