I would like to get help on this issue..In my company infrastructure , we have deployed ruckus AP that is connected to the cisco switch model WS-C2960X-48FPD-L. We have been noticing that some of the ports from the switch reboots randomly for the pas...
Hi, I have been receiving this log on my core switch. Process thrashing on watched queue 'FM Inband ReplyQ'. -Process="FM core", ipl=5, pid=738 Does anyone have any idea what could contribute to this issue? Thank you.
J1-ACC-L07-1#sh interface gigabitEthernet 1/0/5GigabitEthernet1/0/5 is up, line protocol is up (connected)Hardware is Gigabit Ethernet, address is 2c0b.e995.2f85 (bia 2c0b.e995.2f85)Description: WI-FI APMTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 use...
J1-ACC-L07-1# sh spanning-tree interface gigabitEthernet 1/0/5 detailPort 5 (GigabitEthernet1/0/5) of VLAN0060 is designated forwardingPort path cost 4, Port priority 128, Port Identifier 128.5.Designated root has priority 4156, address bc5a.5629.1b8...
yes, its the end device (APs) that are rebooting, I have attached a screenshot below of how it looks like from the switch.Yes, we did consider about the power consumption of the PoE devices , however, these setup and configurations have been there fo...
