HI We have two controllers - 5520 - primary(.5) and secondary(.7) in HA-SKURecently we upgraded the controller from 8.5.131.7 to 8.10.151.0Had a total of 112 APs on the primary controllerto avoid disruptions to service, we first upgraded the secondar...
We are in the process of migrating from 3.7 to 3.9, this will have extended outages etc, so wanted to know if we can add a server running 3.7 to an Ops centre running 3.9 as it doesnt work the other way round.
HI I have a pair of controllers connecting to a pair of mobility anchors.While one controller establishes connection to both controllers, the second has both controller and path down for both anchors.Checked the firewall and found incomplete arp entr...
Our office internet is shared with another company in the same building. Its a 20M/20M internet connection. Both our companies have our own UC 540 and separated by Vlans. Our company has 2 Vlans and the other has 2 Vlans. One of data and one for voic...
I am trying to configure the wireless part on the cisco 887w router.
I am unable to enter the service module. I tried searching for answers in this forum, every answer is related to configuring the service module part, not related to accessing t...
So we did a factory reset on the APs - No luckTAC spent a lot of time on this and dint get a resolutionWe couldnt proceed with the TAC case any further as a lot of time was spent on thiswe found a work around where changing the vlan on the switchport...
Sorry I think I dint explain the scenario correctly but anyways this is the error on the console of AP[*12/09/2021 03:55:36.2661] upgrade.sh: Cleanup tmp files ...[*12/09/2021 03:55:36.2968] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP s...
Hi rrudingThe Secondary is in HA-SKU, the only reason we moved the APs on to the secondary was to upgrade the primary and not cause much disruption to the wireless network.This is a remote location, so we havent been able to get the console logs yet...
