About Mike Hendriks

Mike Hendriks · 09-23-2011

Hello,I'm working on deploying a new 4510R+E for our organization. This is my first experience with a modular switch. I'm trying to enable SSO, however in the redundancy configuration mode, the sso command is not available. Is SSO only available w...

Mike Hendriks · 02-08-2011

I'm trying to get a Cisco 3120G configured for RADIUS authentication. I have many other IOS devices with identical configuration lines working, however, this one is giving me a hard time. The RADIUS server policy is configured by NAS-IP-Address. T...

Mike Hendriks · 01-26-2011

I followed the Configuration Example below to configure MPF FTP inspection with regular expressions.http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080aee442.shtmlI recently had a user complain that they were unable to...

Mike Hendriks · 01-13-2011

We have an HP c7000 blade system chassis with several servers. These servers connect to a pair of 3120 blade switches. The external ports on these switches connect to our HP P4300 SAN nodes. The two NICs on the blade servers are aggregated with LA...

Mike Hendriks · 01-10-2011

Sometime shortly after deploying my ASA 5510, I was forced to remove the default global inspection policy in order to sort out an issue with TLS over SMTP. Today, I'm having problems accessing external hosts with FTP, even in passive mode. As an ex...

Mike Hendriks · 02-09-2011

Thanks Jatin, I believe you're correct.I tried this commandradius-server attribute 4 10.2.1.1As specified in this document:http://www.cisco.com/en/US/docs/ios/12_3/12_3b/feature/guide/gt_siara.htmlUnfortunately, it doesn't seem to be available. The ...

Mike Hendriks · 02-02-2011

Unfortunately, the link you posted does not come up for me. The switch is running 12.2(50)SE3 - filename cbs31x0-universal-mz.122-50.SE3.bin. I am planning on installing the latest at my next opportunity.I ran the show buffers command through the o...

Mike Hendriks · 01-31-2011

I've also done a comparison with a 3750 switch, and noticed something strange. Output from the show interfaces command indicates that the 3120 has a maximum output queue size of zero, while the 3750 has 40. Is this normal? As far as I can tell, th...

Mike Hendriks · 01-31-2011

Thank you, JayaKrishna,It is my understanding, then, that the switch port buffers to SEND data to the server are overflowing, causing the switch to drop those frames. I wonder, could the problem be alleviated somewhat by enabling jumbo frames, reduc...

Mike Hendriks · 01-27-2011

I would be very interested as it does appear that only this one site is affected. Unfortunately, looking at the config, it seems a little bit beyond my understanding of the ASA's MPF. Any insight into that process you may have would be appreciated.

Member Since	‎08-30-2006 08:56 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	20

User Statistics

User Activity

Catalyst 4510R+E Supervisor 7-E SSO Not Available

RADIUS Requests not Populating Attribute 4 (NAS-IP-Address)

ASA 8 MPF FTP Inspection Blocks FTP over SSL

Catalyst 3120 Stack + iSCSI + Blade Servers = Output drops?

Passive FTP to External Server Closing Connection - MPF Problem?

Re: RADIUS Requests not Populating Attribute 4 (NAS-IP-Address)

Re: Catalyst 3120 Stack + iSCSI + Blade Servers = Output drops?

Re: Catalyst 3120 Stack + iSCSI + Blade Servers = Output drops?

Re: Catalyst 3120 Stack + iSCSI + Blade Servers = Output drops?

Re: ASA 8 MPF FTP Inspection Blocks FTP over SSL