Hi All, From reading current config guides etc I understand that VoWLAN should be fine with FlexConnect if APs at a given FlexConnect enabled site are in a common FlexConnect GroupI also seen articles including the following that recommend against th...
Hi All,Here is a rundown of a scenario that I have that i'm hoping that sombody can assist with.I have an ACS 5.2 system integrated with Domain A that is configured to trust Domain B.ACS successfully authenticates users from Domain A or B.I have a gr...
Hi All,Does anybody know whether it is possible to configure RADIUS attributes on a per-user basis within ACS 5.2 ?This was possible under ACS 4.x howver I don't seem to be able to find reference whether ACS5.2 supports it.Thanks,Leon
Hi All,I note that in the WLC v6.0 config guide support for EAP-FAST is listed under the workgroup bridge configuration section.Has anyone been successfull in getting this working ? or have a config example ?I've had limited success on setting up a ...
Hi,Are there any issues in configuring failover between an ASA with an IPS module and an ASA without?As the status of the module is reported on during failover monitoring my guess is that it can't be done.Has anyone tried this ?Leon
Hey Luca,I have a TAC case in progress on this issue at the moment. The engineer has recreated the issue in their Lab and is currently working with dev on it.I'll let you know how i end up going.Leon
I have exactly the same issue.I want clients associating to my H-REAP APs to receive DHCP from DHCP servers on their local L2 network. However they seem to attempt DHCP against the DHCP server set on the interface of the Controller they are homed to....
Hi Raj... Sorry I don't agree with your response here.It is possible to group interfaces on the same firewall for redundancy with the "Interface Redundant" command. Unfortunately though the Managment port can't be included in a interface bundle , eve...
