About marenl01

marenl01 · 07-24-2009

Hi!Does anyone know if it's possible to change the Unified Communications Manager Publisher Address after installation. It seems that in v 7.0 it's implemented under System->CUCM Publisher. I've changed the UCM ip.Regards Marenl01

marenl01 · 10-20-2008

Hi! I have a MCS7816H3 with a Celeron CPU 3.20 Ghz and 2 giga RAM.Is there a way to get two disks mirrored with CUCM 6.1.2? I figured out that CUCM 6.1.2 doesn't support the built-in SATA RAID controller , but isn't software RAID supporter either?The...

marenl01 · 09-11-2013

Hi!I can´t get the video working. I just get a grey screen. Any suggestions?Regards Marenl01

marenl01 · 08-21-2011

Hi!It runs on 6.1.4 so it "should" work on 7.0.2, at least the basic functions. After installing the two packages in the right order you have to reboot, otherwise it won´t show up as a device.

marenl01 · 05-16-2011

Hi!Did the ATA187 show in the device list after you installed the device upgrade? I´m running 6.1.5 and the device upgrade installed without any errors, but it doesn´t show in the device list.Regards marenl01

marenl01 · 07-26-2009

Hi and thank you for your response. Maybe I was a little unclear in my question, but the question was "How to change the Cisco Unified Communications Manager Publisher Address on Cisco Unified Presence 6.0. I've changed the address on the CUCM which ...

marenl01 · 10-24-2008

Hi!Doesn't anybody have this problem? Noone running RAID1 on an MCS7816 with CUCM 6.1.2?Regards marenl01

Member Since	‎05-18-2006 02:00 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	11

User Statistics

User Activity

CUPS 6.0 Change the Cisco Unified Communications Manager Publisher Address

MCS7816H3 RAID 1

Re: License migration using CUCM Enterprise License Manager/Prime Licence Manager

ata187 on CUCM 7.0.2

ata187 on CUCM 7.0.2

Re: CUPS 6.0 Change the Cisco Unified Communications Manager Pub

Re: MCS7816H3 RAID 1