About cflax

cflax · 08-22-2017

Hi There,I'm maybe not the super best ccx script porgramming guy out there but I thought this one is pretty straight forward when infact it doesn't seem like it.The enviroment is a UCCX 11.5 SU1 (11.5.1.11001-34)Goal should be simple, Blind Postcall ...

cflax · 03-27-2003

Good day allI want to create some TCL IVR scripts using V2.0. I have the Developers reference from the cisco site but it is a bit brief. Does anyone have some more reference sources ie books web sites etc that I can look at to understand the process ...

cflax · 09-11-2002

We are running an as5300 with E1 and voice cards. We have users authenicate using the above tcl script, when they are connected. All works fine but we have recently become aware that when entering a certain string of digits (not a vaild pin) the aut...

cflax · 03-11-2002

I have been faced with the task of combining the bandwidth of two 2MB SHDSL cards in a 1720 Router to obtain an effective 4MB link. Can you use PPP Multilink and if so where can i find some sample configs or articlesOr is there another way to combine...

cflax · 05-23-2019

One way audio problems are 99% of the time routing issues between the phones and the ITSPHaving said that, there's also a 1% chance that the UCCX setup you have in place is not supported (i.e. you may be surprised by the unexpected behavior when this...

cflax · 11-20-2018

Worked for me!

cflax · 08-06-2018

The only workaround we found (UCCX 11 / Jabber client) for the same issue was putting a call on hold and retrieving it back. Only then does the 2 way audio start working again without problems.Have a Cisco TAC case open for this so would appreciate i...

cflax · 03-15-2018

Hi there, I know it's an old topic but did you manage to get IPSEC VPN to work on the 4300 ISR I'm facing problems with ISR 4321 and I'm using the EOL Client. I also tried Shrew soft client What's the IOS version you have on the ISR if I may ask? ...

cflax · 08-30-2017

Hi Anthony,Thanks for the hint in regards to the session config, I removed the step where a new session is created and instead went with the get conact info step at the begining of the main script which just worked for me! Brilliant!It's just that th...

Member Since	‎03-11-2002 03:28 PM
Date Last Visited	‎05-31-2023 12:02 AM
Posts	28

User Statistics

User Activity

Enquiry about sessions use in UCCX Script with PostCallTreatment script

Reference Material for creating TCL IVR Scripts

Fraud bug in app_clid_authen_collect.2.0.0.tcl script

Combining bandwidth for two 2MB SHDSL cards in a 1720 Router

Re: One way audio answer by UCCX agent, same call requeue then answer by next agent without disconnect / UCCX 11.0

Re: Cisco 7942 does not boot - only speaker LED is on

Re: One way audio answer by UCCX agent, same call requeue then answer by next agent without disconnect / UCCX 11.0

Re: IP SEC VPN CLIENT FOR ISR 4000

Re: Enquiry about sessions use in UCCX Script with PostCallTreatment script