There is a guide with a picture, very useful, use a Ctrl+F.http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Security/TrustSec_1-99/Dot1X_Deployment/Dot1x_Dep_Guide.html#wp387321
Hi EDC,Have you fix this trouble?I have the same issue on 6.0.4 software.It is solved when I temporarily enable feature otv in core vdc.But its not a better way.
Hi.In your case you should look at the Radius server logs. Authentication error comes from radius. So where you can see additional info.Sent from Cisco Technical Support iPhone App
Hi, guys.Guest portal, you've used is for wired authentication on switches only IMHO. For WLC guest auth you should use https://ISE-ip:8443/guestportal/portal.jsp form at webauth page in WLC config.You can consult with ise guest management document (...
