oh okay thats unfortunate. That is not an option then. You can try the workgroup-bridge option then if that is supported for your model of AP.

Hello, I was able to do some testing with a 9130 AXI and found some more information on your queries.  1. It does not appear to be capable of WGB mode. However, the guide I shared states the 9120AXI is capable of doing WGB mode. This is a difference ...

Hello, I will recommend increasing the Ap capwap timers from the default to 8/5. This is typically a good first step to see if this resolves your issue. You can do this in the AP join profile via Configuration > Tags & profiles > AP join and then edi...

Hello, In order to configure the AP with mesh configurations, it will need to be in bridge mode. However, the 9120 AXI Ap is not capable of operating in bridge/mesh mode. I would recommend using an outdoor AP to accomplish this. An alternative can be...