We are planning to deploy 2 bare metal servers for our new unified communication solution.
do we have to have 2 Vmware ESXI licenses for these 2 servers? if so what would be the most cost effective licenses? vSphere standard, enterprise plus or foun...
We have added 3rd party switch to the ISE and switch send MAB authentication request along with DHCP options.
HW-DHCP-Option=SEP70DA48E8B074;HW-DHCP-Option=1 28 3 15 6 12 42 119 242 120 66 150 43 252;HW-DHCP-Option=Cisco:Codec:1.0;
The label "HW-DHCP...
I mistakenly registered Codec pro with MS Teams experience.
How can I convert it to Cisco Room Experience? I have to do it with the devices, as unable to access central management interfaces. Attached image shows where I pick wrong option. Factory r...
I am trying to add ASA5508 to the firesight but failing.
show netstat displays established session with DNS server.
But with powersight, it is SYN_SENT
My powersight is in the inside interface.
show int ip br indicates the management 1/1 is in down/d...
Hi Guys,Can we do this? can we send multiple show commands together in the CLI? something like this#show ip int br , show cdp nei#(out put of show ip int br)#(out put of show cdp nei)
No, these are sent with RADIUS authentication request. I guessed these information may help device profiling. I may be wrong. TAC would help but not an option in my situation. Kind of dead end.
Phones and codec devices need to be authenticated by the ISE. Switch send phone and codec data collected by DHCP snooping to the ISE for profiling. Its Mac Address Bypass authentication. Everything is RADIUS.
Thanks, Plugged a cable to the Management 0/0 and everythign started to work. I wrongly thought M0/0 is software only as my power power is a software module.
All those 'back ground' checkings are really useful. This level of focus definetly lead to solution doent matter how complex it is. really appriciated.
