I am trying to add ASA5508 to the firesight but failing.
show netstat displays established session with DNS server.
But with powersight, it is SYN_SENT
My powersight is in the inside interface.
show int ip br indicates the management 1/1 is in down/d...
Hi Guys,Can we do this? can we send multiple show commands together in the CLI? something like this#show ip int br , show cdp nei#(out put of show ip int br)#(out put of show cdp nei)
Can somebody tell me how to do this? Example, debug ip ospf interface brief output on vty1 and debug ip ospf events on vty2? or any other way to uniquely identify out put of different debug commands?
I am facing strange issue when configuring Serial interface.There are drop (70 - 80 % success) when pinging connected interface IP. But when the link is looped from remote end, no packets are dropping.My understanding is ICMP doesnt leave interface w...
We have 1M serial link. we noticed 1M up / down traffic. then we disconnected all LAN ports leaving only this serial link up. still we see 1M up/down traffic.debug ip packet shows incomming and out going traffic.How do we solve this porblem?Please he...
Thanks, Plugged a cable to the Management 0/0 and everythign started to work. I wrongly thought M0/0 is software only as my power power is a software module.
All those 'back ground' checkings are really useful. This level of focus definetly lead to solution doent matter how complex it is. really appriciated.
Ok, traffic leaaving connected interface when pinging the connected interface IP.Out put drops increasing.Because 80 % successful, can we asume CRC settings are correct?
There is a clear pattern. Router recieve this s=66.150.8.20 d=66.66.66.66 and replies with s=55.55.55.55 d=66.150.8.20Is router sending some message towards the soruce?Formatted text of previous posting is like this.Ins=66.150.8.24 d=6...
