Hello, I have a small issue about DHCP, I need two servers of DHCP.1 - Provide by Switch Cisco range 172.17.52.02 - Provide by Windows Server range 10.10.10.0 Everything works ok, but when I have a Computer using vlan 101 (at interface GigabitEther...
Hello, Im trying to find Visio Stencil for:CSACSE‐1113‐K9 Cisco Secure ACS 4.X Solution Engine 1113 ApplianceBut in http://www.cisco.com/en/US/products/prod_visio_icon_list.htmlI didn't find any... I also search in xml file "http://www.cisco.com/en/U...
Hi, Im trying to apply something like this in interface "GigabitEthernet over SIP-400:!class-map match-all SHAPING match any !policy-map SHAPE-1000 class SHAPING shape average 1000000000 10000000 0but is no possible because the BC..."Shape susta...
Cisco ip2ipHello, I need a little help with two routers 3845, they are brand new routers, I will do ip2ip with them but all ios I have this error:: *May 19 09:47:05.887: %L2TP-3-ILLEGAL: _____:_____: ERROR: [l2tp_db_get_cc::1035], -Traceback= 0x6181...
Hello I have a little doubt, I need to cover two diferentes areas with AG, is possible to use only one 1242 with:1-A: AIR-ANT5160V-R (Patch)2-A: AIR-ANT5160V-R (Patch)3-G: AIR-ANT2410Y-R (YAGI)4-G: AIR-ANT2410Y-R (YAGI)Or1-A: AIR-ANT5160V-R (Patch)2-...
Hello, one question is possible to migrate from ACS 4.1 SE to ACS 4.2 SE?Where I can find the PAK, or serial number in 4.1 SE, to go to http://www.cisco.com/upgrade/ and request the 4.2 dvd recovery...Or I dont need any PAK or serial number?Thanks in...
Hi Laurent, humm dont work on the SIP-400, but I also have GLCs... 2 ports at GigaEthernet, if I apply do them dont work also :) is normal?Thanks one more time.
Thanks for your answer.The Link is 1Gb, can I apply:!class-map match-all SHAPINGmatch any!policy-map SHAPE-1000class SHAPINGbandwith 1000queue-limit 10!10 for queue-limit is ok?Thanks in advance.
