About rwaqanitoga

rwaqanitoga · 01-27-2016

Hi members, We faced interface down when trying to enable gi0/0/3 on ASR1002 to interconnect using a cat6 to a Cisco 6500 switch on gi6/1. The interface module used was a GLC-T 1000Base-T SFP(non cisco sfp) interface GigabitEthernet0/0/3 no ip addre...

rwaqanitoga · 03-10-2015

Dear Members, I am trying to troubleshoot and revive a crashed router over the weekend.I tried consoling and rebooting the router but nothing appeared on my screen(on a black screen). I suspected it would be an issue with the ROM which must have been...

rwaqanitoga · 11-02-2014

Dear Members, I would like to find out how we can increase the number of anyconnect vpn logins.Our current license only allows for 2 logins.What can we do to increase the number of anyconnect vpn logins to 10 users at least? I will be looking forwar...

rwaqanitoga · 07-22-2014

Hi Everyone,I am recently noticing the error log below on our gateway BGP router and am interested to know the fix in order to clear this error log.Jul 22 11:26:47.739: %EARL_NETFLOW-SP-4-TCAM_THRLD: Netflow TCAM threshold exceeded, TCAM Utilization ...

rwaqanitoga · 09-23-2013

Hi,I was wondering if it is possible to do a global IP to global ip NAT on cisco router.I have a scenario where a LAN has access to 2 Internet Providers(Public networks)And in order to divert some traffics from the LAN that has Provider1 public addre...

rwaqanitoga · 01-27-2016

Hi experts, We even tried a Cisco brand SFP but still facing the issue(interface down) Also need adding that for both non-cisco and cisco sfp there was a critical alarm Hardware StatusCritical This was only cleared by disabling the interface for gi0...

rwaqanitoga · 03-26-2015

Hi Leo,Am checking right now and will update soon... Regards,Ruveni

rwaqanitoga · 03-26-2015

Hi Leo, Thankyou for responding!!Yes, appliance is powering up. Yes, I can see LED display.ok, if the appliance's baud rate was changed, how can i recover that?I doubt my console settings were wrong because I could console into other routers and swit...

rwaqanitoga · 11-02-2014

Thankyou Shekharmore003. Cheers,RWaqanitoga

rwaqanitoga · 07-29-2014

Hi Akash,Thankyou for this explanation and the fix you have outlined.So far now(more than a week) we have reduced the log buffer from 100000bytes to 8192bytes and after reboot the error seems to have gone away. We are still monitoring this issue and...

Member Since	‎11-29-2007 08:43 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	53

User Statistics

User Activity

GLC-T 1000Base-T SFP on ASR1002

C7200 Router bootup

AS5510 AnyConnect Lisence

Cisco7604 TCAM Utilization logged

Global IP to Global IP NAT

Hi experts,

Hi Leo,Am checking right now

Hi Leo, Thankyou for

Thankyou Shekharmore003.

Hi Akash,Thankyou for this