I'm using Cisco PGW2200 solution ver.9.4.1 in nailed mode. When i got IAM, PGW sending Address Complete Message which contains such parameter as "Called party status". By default MGC setting this parameter to "0 no_indication_default". here is ex...
Andy, hidid you resolve this problemI have the same issueEvery 80 seconds EIGRP is DOWNDec 25 15:49:47: %DUAL-5-NBRCHANGE: EIGRP-IPv4 101: Neighbor 10.201.0.2 (POS3/0/0) is up: new adjacencyDec 25 15:51:06: %DUAL-5-NBRCHANGE: EIGRP-IPv4 101: Neighbo...
Solution found!Just change two parameters in /opt/CiscoMGC/etc/XECfgParm.dat*.ClearingLocation = 7 # 0 = Normal mapping behaviour, LCM will not override the Clearing Location field in Call Context*.DefaultLocation = 7 # 0 = N...
How many concurrent calls during peak hours on 5400?Do you use radius AAA for incoming calls?what version of IOS are you use?please post the output of command:show proc cpu sorted | excl 0.00
