About stephan_frye

stephan_frye · 09-11-2019

Attempting to register a Tandberg 3000MXP (running F4.0 NTSC) to our Expressway, which is running X8.11.4 using H323. Getting the following error on the Expressway - "Received from unauthenticated source". The Tandberg unit registers fine to our VCS...

stephan_frye · 12-18-2018

We have a Cisco SX80 with speakertrack running firmware ce 9.3.2 748b9742af6 2018-05-28 and a valid MultiSite option key installed, registered to our on prem Cisco Call Manager running v11.5.1.12900-21. Connecting to multiple sites directly via the...

stephan_frye · 12-21-2017

Touch 10's connected to Cisco video codec systems running newer CE9.x firmware have a funky background where large color balls float in and around the Touch 10 display. Is there a way to disable this feature?

stephan_frye · 09-12-2019

Thanks Wayne! Agreed regarding replacing. This is the first step in that process, as the Tandberg is currently registered to very old VCSc\VCSe that goes EoS 9-30-2019. I was able to get the Tandberg to successfully register to the Expressway after ...

stephan_frye · 07-26-2019

Hi Mark, what version of Webex is this layout change being applied? We're now finding that when connected from a Cisco video system to a Webex meeting you can NO longer change the layout of the meeting via the Touch10! Can you tell me if this is th...

stephan_frye · 12-18-2018

RESOLVED! Turns out to be a setting on the SX80 codec - Conference\Multipoint Mode Changing the setting from CUCMMediaResourceGroupList to MultiSite resolved the issue!

stephan_frye · 10-23-2018

Hi Acevirgil, Is the Multisite licensing still required for VC units, i.e. SX20, SX80, SRK and SRK+, in order to make multi site\point to point connections, when these devices are registering directly to Cisco Call Manager v11.5?! Thank you, -Ste...

stephan_frye · 12-22-2017

Good Morning Patrick, Thanks for your reply. Is it possible to set the TV\display background to a custom image AND using the branding option to set a custom image to the Touch 10 as well? When we briefly tested this it appeared that the halfwake...

Member Since	‎09-19-2016 07:33 AM
Date Last Visited	‎09-13-2019 12:01 AM
Posts	8

User Statistics

User Activity

Expressway Registration Error - Received from unauthenticated source"

MultiSite Not Working from Touch 10

Touch 10 Background w/CE9.2.1

Re: Expressway Registration Error - Received from unauthenticated source"

Re: Layouts for a video system when dialling into webex

Re: MultiSite Not Working from Touch 10

Re: You will need the option 2 as

Re: Touch 10 Background w/CE9.2.1