About support-SPR

support-SPR · 12-01-2021

Hi, I configured a policy-map in order to shape the trafic toward the ipsec tunnel.The VPN is done by a cryptomap on the outgoing interface (FE4). Tunnel is up, no problem.Here are my ACL, class-map then my policy-map configurations : Extended IP ac...

support-SPR · 12-02-2021

In the meantime, now Qos for traffic output works, I come back with a similar problem but with the input tunneled traffic...Indeed, I would like to restrict the bandwidth too for the traffic coming from the ipsec tunnel.Shaping and Bandwitdth command...

support-SPR · 12-02-2021

Hi again, I found it and it seems working !I was lookin for again and again on the web and finally I found someone this page (https://flylib.com/books/en/2.650.1/designing_qos_for_ipsec_vpns.html) which explains more or less the same thing you told m...

support-SPR · 12-02-2021

Sure, here it is : Current configuration : 8254 bytes!! Last configuration change at 12:01:21 Reunion Thu Dec 2 2021 by cisco! NVRAM config last updated at 11:47:55 Reunion Thu Dec 2 2021 by cisco!version 15.8service timestamps debug datetime msecse...

support-SPR · 12-01-2021

Hi guys, Thanks for your replies !First, unfortunately, I can't use VTI technology on this case because on the other end, there an old Sonicwall which is unable to deal with VTI, too bad...So, I have to go on with cryptomap.I tried before to post to ...

Member Since	‎12-01-2021 07:17 AM
Date Last Visited	‎12-08-2021 07:45 AM
Posts	5

User Statistics

User Activity

Policy-Map for shaping not working

Re: Policy-Map for shaping not working

Re: Policy-Map for shaping not working

Re: Policy-Map for shaping not working

Re: Policy-Map for shaping not working