我在cisco 7609上配置了SPAN,源端口设置为both模式,通过在目的端口上抓包发现,无法收到tx方向的流量包,只能收到rx方向的流量包。我确定源镜像端口两端都是有访问流量的,但是我明明选择的是both,为什么会只有rx的流量?配置命令如下:monitor session 1 source interface gigabitEthernet 0/40 bothmonitor session 1 destination interface gigabitEthernet 0/41拓扑结构:...