About reroberto

reroberto · 08-21-2013

Hi,I have some problems with a per port per vlan rate-limiting on a cisco 7600eth#show moduleMod Ports Card Type Model Serial No.--- ----- -------------------------------------- ------------------ -----------1 24 CEF720 24 port 1000mb SFP WS-X6724-SF...

reroberto · 08-28-2013

Hello Dmitry,Ok,but in this way the traffic, coming from a trunk, must flow through a L3 interface (SVI). I thought it was possible a L2 VLAN traffic classification on a L2 interface, for the reason that other type of classification are possible on a...

reroberto · 08-28-2013

Thanks for your reply Dmytro,I already tried a VLAN-Based QoS configuration, but applying the policy-map P427 on a test SVI (L3) interface (with & without IP address) the problem remains the same: a L2 classification problem in the class-map match-an...

reroberto · 08-26-2013

Hi all, I still do not understand why CISCO 7600 can be configured as “per vlan layer2 QoS classification”, but still it does not work . I have been through the technical features and below is what I found: "It is important to note that on the Cataly...

Member Since	‎10-06-2011 03:19 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	6

User Statistics

User Activity

per port per Vlan rate-limit - "match vlan" error on cisco 7600

Re: per port per Vlan rate-limit - "match vlan" error on cisco 7

per port per Vlan rate-limit - "match vlan" error on cisco 7600

per port per Vlan rate-limit - "match vlan" error on cisco 7600