About Markus5849

Markus5849 · 04-19-2023

I'm unable to SSH into the Fabric Interconnect Cluster IP and also each Fabric Interconnect A & B. Have tried with telnet FI cluster IP, FI-A and FI-B to port 22 all passed. Can browse to UCSM website as well. From UCSM, under communications manageme...

Markus5849 · 03-01-2023

I'm going to create a new standard HX cluster with 3 converged and 3 compute-only nodes. May I know is it possible for me to choose also the compute-only nodes during cluster creation? Or I have to expand the HX cluster after creation with compute-on...

Markus5849 · 02-16-2023

Just wondering can I use the same VLAN during Hyperflex standard wizard creation for Hx-mgmt-vlan and CIMC Inband Management?Or it must be different?

Markus5849 · 02-16-2023

I'm building a new HX cluster into my production environment which consists of a new management VLAN id. Currently my FI should be using disjointed layer 2 because I have fixed the port channel group to carry certain VLAN only. So with this, may I kn...

Markus5849 · 12-12-2022

We have a standalone FI 64108 and are trying to deploy hyperflex cluster using HXDP 4.5 (2a). However, we're getting error "list index out of range". Before that when we deploy with a pair of Fabric Interconnect cluster there's no issue but when we s...

Markus5849 · 05-04-2023

Hi KyoCode,Yes I'm deploying it with 5.0(2b) HXDP, I guess this is related to my issue.

Markus5849 · 05-04-2023

Hi KyoCode,May I know do you have any solution for this since you have faced it before?Appreciate that.

Markus5849 · 05-04-2023

Hi Steven,I failed on the first step which is after selecting compute-only nodes from the standard cluster expansion workflow. My compute-only node is UCS C220 M5SX and with two local disks. Why would this error appear?

Markus5849 · 05-03-2023

Hi Steven,I'm trying to read the article and found below steps:It mentions there will be an automatic association but how? I have the HXDP installer OVA deployed and may I know how should I achieve this? If I click on the standard workflow for cluste...

Markus5849 · 03-11-2023

Hi Steven,Thanks for the information. I'll try with your provided steps and update you again on the outcome.Run the HX installer to let the installer create the UCS Service profile and associate the SP the compute-only servers.The HX installer will s...

Member Since	‎12-22-2021 01:39 AM
Date Last Visited	‎06-14-2023 12:03 AM
Posts	32
Total Helpful Votes Received	11

User Statistics

User Activity

Unable to SSH to FI but can browse UCSM

Creating HX cluster with compute-only nodes

Can CIMC Inband Management VLAN same as Hx-Mgmt VLAN?

Add VLAN to uplink manager during HX cluster creation

Hyperflex DataPlatform 4.5 List Index Out of Range (Standalone FI)

Re: Creating HX cluster with compute-only nodes

Re: Creating HX cluster with compute-only nodes

Re: Creating HX cluster with compute-only nodes

Re: Creating HX cluster with compute-only nodes

Re: Creating HX cluster with compute-only nodes